Skip to content
Blue Sky Roofing
Get quote
Glen Ridge · Palm Beach County

Roof replacement in Glen Ridge, FL

In Glen Ridge, a shingle roof replacement on a typical 2,318 sq ft home runs about $12,600–$20,700 (Blue Sky pricing as of October 2026); Blue Sky crews don't work here yet, so we'll refer you to a licensed roofer who does.

Blue Sky crews don't work in Glen Ridge yet

Send us your address and project and we'll refer you to a licensed roofer who works here.

Request a referral

What a new roof costs here

For the median single-family home in Glen Ridge: 2,318 sq ft of living area, about 32 roof squares.

  • Shingle

    Architectural asphalt shingles

    $16,200

    Most jobs $12,600–$20,700

    $420–$590 per square

  • Metal

    Standing seam metal panels

    $38,900

    Most jobs $30,300–$49,800

    $1,010–$1,420 per square

  • Tile

    Concrete tile

    $38,900

    Most jobs $30,000–$50,400

    $1,000–$1,440 per square

  • Flat / low-slope

    Modified bitumen or TPO membrane

    $19,400

    Most jobs $15,000–$25,200

    $500–$720 per square

  • Composite

    Synthetic slate, shake, or tile (e.g. DaVinci, Brava)

    $64,800

    Most jobs $49,000–$85,500

    $1,620–$2,470 per square

Commercial roofs

Roofs on commercial buildings in Glen Ridge, priced per square because building sizes vary too much for a typical total.

Flat / low-slope
$1,000 per squareMost jobs $810–$1,230
Metal
$1,560 per squareMost jobs $1,320–$1,850
Shingle
$650 per squareMost jobs $550–$770
Tile
$1,560 per squareMost jobs $1,300–$1,880
Composite
$2,600 per squareMost jobs $2,110–$3,210

Ranges start from Blue Sky's standard pricing (October 2026) and tighten as we complete jobs nearby. Installed price for a full replacement, including tear-off, permit, and disposal. Your written estimate after an inspection is the final price. How we price

Glen Ridge homes at a glance

Single-family homes
73
Median year built
1958
Built before 2002
89%
Predate the statewide Florida Building Code
Median living area
2,318 sq ft

Source: Florida Department of Revenue 2026 preliminary tax roll.

ZIP codes with a Glen Ridge mailing address: 33406

Local rules that change the job

  • Wind code

    Palm Beach County is outside the High-Velocity Hurricane Zone. Roofing products need Florida product approval, and the Florida Building Code's wind requirements for the home's exact location apply.

  • Who issues the permit

    Cities permit homes inside their limits and Palm Beach County permits unincorporated addresses. A mailing city doesn't always match city limits, so the permitting office is confirmed from the parcel before filing.

  • Older homes

    89% of single-family homes in Glen Ridge were built before the statewide Florida Building Code took effect in 2002. Re-roofing an older home can trigger upgrades such as re-nailing the roof deck and adding a secondary water barrier; a written estimate should include them.

Look up your home

See the roof estimate for a specific address.

Roofing services in Glen Ridge

Elsewhere in Palm Beach County