Skip to content
Blue Sky Roofing
Get quote
Miami Springs · Miami-Dade County

Roof Replacement in Miami Springs, FL

In Miami Springs, a shingle roof replacement on a typical 1,800 sq ft home runs about $12,300–$20,200, including the 20% High-Velocity Hurricane Zone adder (Blue Sky pricing as of October 2026); Blue Sky crews don't work here yet, so we'll refer you to a licensed roofer who does.

Blue Sky crews don't work in Miami Springs yet

Send us your address and project and we'll refer you to a licensed roofer who works here.

Request a referral

What roof replacement costs in Miami Springs

For the median single-family home here: 1,800 sq ft of living area, about 26 roof squares.

  • Shingle

    Architectural asphalt shingles

    $15,700

    Most jobs $12,300–$20,200

    $510–$710 per square

  • Metal

    Standing seam metal panels

    $37,700

    Most jobs $29,400–$48,400

    $1,220–$1,700 per square

  • Tile

    Concrete tile

    $37,700

    Most jobs $29,100–$48,900

    $1,200–$1,730 per square

  • Flat / low-slope

    Modified bitumen or TPO membrane

    $18,900

    Most jobs $14,600–$24,500

    $600–$870 per square

  • Composite

    Synthetic slate, shake, or tile (e.g. DaVinci, Brava)

    $62,900

    Most jobs $47,600–$83,100

    $1,940–$2,960 per square

Commercial roofs

Roofs on commercial buildings in Miami Springs, priced per square because building sizes vary too much for a typical total.

Shingle
$780 per squareMost jobs $660–$920
Metal
$1,870 per squareMost jobs $1,580–$2,220
Tile
$1,870 per squareMost jobs $1,560–$2,250
Flat / low-slope
$1,200 per squareMost jobs $970–$1,480
Composite
$3,120 per squareMost jobs $2,530–$3,850

Ranges start from Blue Sky's standard pricing (October 2026) plus the 20% High-Velocity Hurricane Zone adder and tighten as we complete jobs nearby. Installed price for a full replacement, including tear-off, permit, and disposal. Your written estimate after an inspection is the final price. How we price

Local rules that change the job

  • High-Velocity Hurricane Zone

    Miami-Dade County is in the HVHZ. Roofing products need HVHZ product approval (typically a Miami-Dade Notice of Acceptance), and the Florida Building Code's HVHZ roofing requirements apply to installation and inspections.

  • Who issues the permit

    Cities permit homes inside their limits and Miami-Dade County permits unincorporated addresses. A mailing city doesn't always match city limits, so the permitting office is confirmed from the parcel before filing.

  • Older homes

    97% of single-family homes in Miami Springs were built before the statewide Florida Building Code took effect in 2002. Re-roofing an older home can trigger upgrades such as re-nailing the roof deck and adding a secondary water barrier; a written estimate should include them.

More in Miami Springs